MICROWAVE · INSTRUMENTS · BOARDS · MODULESgeorge@hportek.com
PRECISION IN EVERY SIGNAL
SYVNA-2P-M20G Dual-Port Vector Network Analyzer
HPORTEK / Vector Network AnalyzersSYVNA-2P-M20G

Vector Network Analyzers

SYVNA-2P-M20GDual-Port Vector Network Analyzer

The SYVNA-2P-M20G is a low-cost, high-performance, compact dual-port VNA covering 10 MHz to 20 GHz. It offers bench-level performance with open interfaces for secondary development, suitable for laboratories, research/education, and system integration.

  • Compact, lightweight, low power, portable
  • Multi-site parallel testing
  • LAN interface for secure PC control
Enquire about this product
SpecificationsHandling notes

TECHNICAL DATA

Technical specifications

Specifications correspond to the product catalogue. Contact our technical team for configuration and operating conditions.

SYVNA-2P-M20G Technical specifications
ParameterSpecification / typical value
Functional Specifications
Independent S-parameter measurementSupported
Swept/fixed-frequency modes; time-domain analysis (cable fault distance, reflection distance)Supported
Measurement, calibration & de-embedding via host softwareSupported
Technical Specifications
Frequency Range10MHz-20GHz
Frequency Accuracy±5×10-6
Frequency Resolution1Hz
Sweep Points2 to 10001 points
Measurement Bandwidth1Hz～300kHz
Dynamic Range≥80dB
Transmission Accuracy±0.2dB/±2°（0dB～10dB）；；±0.1dB/±2°（-45dB～ 0dB）；；±0.2dB/±2°（-65dB～-45dB）；；±1dB/ ±6°（-70dB～-65dB）
Reflection Accuracy±0.5dB/±4°（-15dB～0dB）；；±1.5dB/±10°（-25dB～- 15dB）；；±5.5dB/±30°（-35dB～-25dB）
Trace Noise0.002dBrms（10MHz～6.5GHz）；； 0.003dBrms（6.5GHz～12GHz）；； 0.004dBrms（12GHz～20GHz）
Temperature Characteristics0.02dB/℃（10MHz～6.5GHz）；；0.04dB/℃（6.5GHz ～20GHz）；
Effective Directivity35dB
Effective Source Match30dB
Effective Reflection Tracking±0.5dB
Burn-out Power+25dBm
Ext. Ref. Frequency10MHz
Ext. Ref. Power0dBm～5dBm
Output Ref. Frequency10MHz
Output Ref. Power0dBm～5dBm
General Specifications
Supply Voltage12Vdc
Power Consumption40W
Operating Temperature+5℃～+40℃
Storage Temperature-50℃～+70℃
Relative Humidity90% RH at 25°C
Dimensions (excl. connectors)200mm×156mm×48mm
Weight4kg

Specifications are subject to change without notice. Contact our technical team for full conditions, interface definitions, and ordering information.

Handling notes

  • Take anti-static precautions and ensure device ports are clean before use.
  • Use a torque wrench to tighten coupling nuts where applicable.
  • Check connector pin depth before calibration to avoid damage to calibration devices.

EXPLORE MORE

Related products

Explore category

LET’S CONNECT

Find the right product for your next breakthrough.

Talk to our team about your measurement, signal processing, and system integration requirements.

Contact our team