Vector Network Analyzers
SYVNA-1P-20G-ASingle-Port Vector Network Analyzer
The SYVNA-1P-20G-A is a low-cost, high-performance, compact single-port VNA covering 10 MHz to 20 GHz. It is small enough…
View product
HPORTEK / Vector Network AnalyzersSYVNA-2P-M26.5G
Vector Network Analyzers
SYVNA-2P-M26.5GDual-Port Vector Network Analyzer
The SYVNA-2P-M26.5G is a compact, low-cost, high-performance modular dual-port VNA covering 100 MHz to 26.5 GHz. Open interfaces support flexible integration into high-end test platforms for production test and automated calibration.
- Compact, lightweight, low power, portable
- Multi-site parallel testing
- LAN interface for secure PC control
TECHNICAL DATA
Technical specifications
Specifications correspond to the product catalogue. Contact our technical team for configuration and operating conditions.
| Parameter | Specification / typical value |
|---|---|
| Functional Specifications | |
| Independent S-parameter measurement | Supported |
| Swept/fixed-frequency modes; time-domain analysis (cable fault distance, reflection distance) | Supported |
| Measurement, calibration & de-embedding via host software | Supported |
| Technical Specifications | |
| Frequency Range | 100MHz～26.5GHz |
| Output Power | -40dBm～0dBm(1GHz≤f≤16GHz)；-40dBm～- 5dBm(16GHz＜f≤26.5GHz) |
| Sweep Points | 2 to 100001 points |
| Frequency Accuracy | ±2.5×10-6 |
| IF Bandwidth | 10Hz～300kHz |
| Transmission Coeff. Accuracy | ±0.2dB/±2°（0dB～10dB）；±0.2dB/±2°（-45dB～ 0dB）；±0.5dB/±5°（-60dB～-45dB） |
| Reflection Coeff. Accuracy | ±0.5dB/±5°（-15dB～0dB）；±1.5dB/±10°（-25dB～- 15dB）；±5.5dB/±30°（-35dB～-25dB） |
| Transmission Dynamics | 70dB typical (100MHz to 18GHz, 100Hz bandwidth); 60dB typical (18 to 26.5GHz, 100Hz bandwidth) |
| General Specifications | |
| Dimensions (L×W×H) | ≤160mm×80mm×25mm |
| Weight | ≤0.8kg |
| Supply & Power | 12Vdc/30W |
| Operating Temperature | -10℃～+40℃ |
| Storage Temperature | -20℃～+55℃ |
Specifications are subject to change without notice. Contact our technical team for full conditions, interface definitions, and ordering information.
SYSTEM ARCHITECTURE
Product block diagrams
Handling notes
- Take anti-static precautions and ensure device ports are clean before use.
- Use a torque wrench to tighten coupling nuts where applicable.
- Check connector pin depth before calibration to avoid damage to calibration devices.
EXPLORE MORE
Related products
Vector Network Analyzers
SYVNA-2P-M20GDual-Port Vector Network Analyzer
The SYVNA-2P-M20G is a low-cost, high-performance, compact dual-port VNA covering 10 MHz to 20 GHz. It offers bench-level performance…
View product
Vector Network Analyzers
SYVNA-2P-M40GDual-Port Vector Network Analyzer
The SYVNA-2P-M40G is a low-cost, high-performance, compact dual-port VNA covering 10 MHz to 40 GHz. It offers bench-level performance…
View product
Vector Network Analyzers
SYVNA-2P-B20GDual-Port Vector Network Analyzer
The SYVNA-2P-B20G is a low-cost, high-performance, portable dual-port VNA covering 10 MHz to 20 GHz. It features a 10.1"…
View productLET’S CONNECT
Find the right product for your next breakthrough.
Talk to our team about your measurement, signal processing, and system integration requirements.