MICROWAVE · INSTRUMENTS · BOARDS · MODULESgeorge@hportek.com
PRECISION IN EVERY SIGNAL
SYVNA-2P-B20G Dual-Port Vector Network Analyzer
HPORTEK / Vector Network AnalyzersSYVNA-2P-B20G

Vector Network Analyzers

SYVNA-2P-B20GDual-Port Vector Network Analyzer

The SYVNA-2P-B20G is a low-cost, high-performance, portable dual-port VNA covering 10 MHz to 20 GHz. It features a 10.1" LCD touchscreen and built-in battery for field use, delivering bench-level performance with open interfaces.

  • Low cost, high performance, compact
  • Integrated 10.1" LCD touchscreen
  • User-friendly interface
  • Battery life over 2 hours
  • Bench-top VNA performance
  • Dual-channel, dual-path full S-parameter
  • Open interface, secondary development
Enquire about this product
SpecificationsHandling notes

TECHNICAL DATA

Technical specifications

Specifications correspond to the product catalogue. Contact our technical team for configuration and operating conditions.

SYVNA-2P-B20G Technical specifications
ParameterSpecification / typical value
Functional Specifications
Independent S-parameter measurementSupported
Swept/fixed-frequency modes; time-domain analysis (cable fault distance, reflection distance)Supported
Friendly display & control softwareSupported
Technical Specifications
Frequency Range10MHz～20GHz
Output Power-45dBm～10dBm(10MHz≤f≤8GHz)；-45dBm～ 0dBm(8GHz≤f≤18GHz)；-45dBm～- 5dBm(18GHz≤f≤20GHz)
Min. Time per Point500μs/point (IFBW=10kHz)
Sweep Points2 to 10001 points
Frequency Accuracy±2.5×10-6
Frequency Resolution50Hz
IF Bandwidth10Hz～300kHz
Cable Loss Range30dB
Transmission Coeff. Accuracy±0.2dB/±2°（0dB～10dB）；±0.1dB/±2°（-45dB～ 0dB）；±0.2dB/±2°（-65dB～-45dB）；±1dB/±6°（- 70dB～-65dB）
Reflection Coeff. Accuracy±0.5dB/±5°（-15dB～0dB）；±1.5dB/±10°（-25dB～- 15dB）；±5.5dB/±30°（-35dB～-25dB）
Trace Noise0.010dBrms（IFBW=3kHz）
Temperature Dependency0.05dB/℃
Effective Directivity35dB
Effective Source Match30dB
Effective Reflection Tracking±0.5dB
Effective Load Match29dB
Effective Transmission Tracking±0.5dB
Burn-out Power+25dBm
Ext. Ref. I/O Frequency20MHz
Ext. Ref. I/O Power0dBm～5dBm
General Specifications
Dimensions320 mm × 240 mm × 60 mm (excluding corner guards and handle)
Weight≤5 kg (including battery)
Supply & Power12Vdc/35W
Battery Life≥2h
Operating Temperature-10℃～+40℃
Storage Temperature-20℃～+55℃

Specifications are subject to change without notice. Contact our technical team for full conditions, interface definitions, and ordering information.

Handling notes

  • Take anti-static precautions and ensure device ports are clean before use.
  • Use a torque wrench to tighten coupling nuts where applicable.
  • Check connector pin depth before calibration to avoid damage to calibration devices.

EXPLORE MORE

Related products

Explore category

LET’S CONNECT

Find the right product for your next breakthrough.

Talk to our team about your measurement, signal processing, and system integration requirements.

Contact our team