EMC Power Amplifiers
SYPA-150W100MCW Solid-State Power Amplifier
The SYPA-150W100M is a solid-state, air-cooled wideband power amplifier for applications requiring wide instantaneous bandwidth, high gain, and linearity.…
View product
HPORTEK / EMC Power AmplifiersSYPA-10W1000M
EMC Power Amplifiers
SYPA-10W1000MCW Solid-State Power Amplifier
The SYPA-10W1000M is a solid-state, air-cooled wideband power amplifier for applications requiring wide instantaneous bandwidth, high gain, and linearity. It can be rack-mounted in a 19-inch standard cabinet or used as a bench-top instrument. It delivers at least 10W1000M of RF output power. The operator can adjust gain via the front panel. When RF input exceeds 0 dBm, the LNA power is shut off for protection. Over-temperature conditions trigger power-down to protect the amplifier. It features a color LCD touchscreen and physical buttons, displaying operational and fault status. Local and remote control are available via GPIB, USB, and Ethernet.
- 10W, CW 10W、
- 10kHz–1000MHz wideband 10kHz～1000MHz
- Class A amplifier A
- Portable bench-top instrument
- High efficiency
- Modular design
TECHNICAL DATA
Technical specifications
Specifications correspond to the product catalogue. Contact our technical team for configuration and operating conditions.
| Parameter | Specification / typical value |
|---|---|
| Functional Specifications | |
| Remote Control | Supported |
| Power Display | Supported |
| Adjustable Gain | Supported |
| Internal Leveling | Supported |
| Protection | Input overload, VSWR and over-temperature protection supported |
| Operating Mode | Supports AM, FM, PM; pulse modulation mode and CW mode |
| Performance Specifications | |
| Operating Frequency | 10kHz～1000MHz |
| Output Power | ≥10W (minimum) |
| Max. Input Power | 1.0mW |
| Output P3dB | ≥10W |
| Output P1dB | ≥10W |
| Flatness | ≤±1.5dB |
| Gain | ≥43dB |
| Gain Adjustment Range | ≥20dB |
| Power Display Accuracy | ≤±0.3dB |
| Harmonic Suppression | ≥20dBc |
| General Specifications | |
| Power Supply | Voltage 220 V ± 10%, frequency 50 Hz ± 5% |
| Dimensions | 181 mm × 585 mm (W × H × D) |
| Weight | ≤21kg |
| Operating Temperature | 0℃～+40℃ |
| Storage Temperature | -40℃～+70℃ |
Specifications are subject to change without notice. Contact our technical team for full conditions, interface definitions, and ordering information.
Handling notes
- Take anti-static precautions and ensure device ports are clean before use.
- Use a torque wrench to tighten coupling nuts where applicable.
- Check connector pin depth before calibration to avoid damage to calibration devices.
EXPLORE MORE
Related products
EMC Power Amplifiers
SYPA-500W250MCW Solid-State Power Amplifier
The SYPA-500W250M is a solid-state, air-cooled wideband power amplifier for applications requiring wide instantaneous bandwidth, high gain, and linearity.…
View product
EMC Power Amplifiers
SYPA-500W1000MCW Solid-State Power Amplifier
The SYPA-500W1000M is a solid-state, air-cooled wideband power amplifier for applications requiring wide instantaneous bandwidth, high gain, and linearity.…
View productLET’S CONNECT
Find the right product for your next breakthrough.
Talk to our team about your measurement, signal processing, and system integration requirements.