WB-LNA Wideband Low Noise Amplifier (LNA)

TECHNICAL DATA

Technical specifications

Specifications correspond to the product catalogue. Contact our technical team for configuration and operating conditions.

WB-LNA Technical specifications
Parameter	Specification / typical value
Frequency Range	X0MHz～X50MHz
Gain	≥17dB±1dB (output)
Noise Figure	≤3dB
OIP2	≥58dBm
OIP3	≥38dBm
Limiting Protection Output Level	20±1dBm
In-Band Spurious	≤-120dBm
I/O VSWR	≤1.8
Large-Signal Survivability (no damage)	1W CW, 60 seconds
MTBF	≥50000h
MTTR	≤0.5h
Voltage	220VAC±10%
Power Consumption	≤3.6W
Operating Temperature	-45℃～70℃
Storage Temperature	-55℃～85℃

Specifications are subject to change without notice. Contact our technical team for full conditions, interface definitions, and ordering information.

Some frequencies retain the X placeholders used in the catalogue. Contact our team to confirm the specific frequency configuration.

Take anti-static precautions and ensure device ports are clean before use.
Use a torque wrench to tighten coupling nuts where applicable.
Check connector pin depth before calibration to avoid damage to calibration devices.

EXPLORE MORE