High-Speed Acquisition & Processing Boards
SYHS-RFSOC-PCIEHigh-Speed Acquisition & Replay Card
The SYHS-RFSOC-PCIE is an RFSOC-based PCIe high-speed signal generation and acquisition board with 4 TX and 1 RX RF…
View product
HPORTEK / High-Speed Acquisition & Processing BoardsSYHS-VU13P-PROC
High-Speed Acquisition & Processing Boards
SYHS-VU13P-PROCHigh-Performance Computing Board
High-Performance Computing Board. An FPGA-based real-time digital signal processing board for digital filtering, demodulation, high-speed optical data transfer and multi-board synchronization in research and automated testing.
- High-performance FPGA with massive DSP & on-chip memory
- Multiple GTY transceivers + optical ports; high-bandwidth, low-latency
- External DDR4 for wideband data buffering
- External ref. clock & trigger; distributed processing clusters
- Ethernet and other high-speed protocols
TECHNICAL DATA
Technical specifications
Specifications correspond to the product catalogue. Contact our technical team for configuration and operating conditions.
| Parameter | Specification / typical value |
|---|---|
| Functional Specifications | |
| Enable control: TX/RX enable timing control (optical trigger) | Supported |
| Signal generation: IQ signal processing and generation | Supported |
| Remote data transfer: data transfer via optical interface | Supported |
| Technical Specifications | |
| EMMC | ≥8GB |
| E2PPROM | ≥64Kb |
| DDR | Up to 512 GB |
| QSPI Flash | ≥32MB |
| Optical Interface Data Rate | 100Gsps |
| Optical Interface Type | QSFP28 |
| Number of Optical Interfaces | 4 channels |
| PCIe Interface | PCIE3.0×16 |
| GPIO Interface | 40 (3.3V LVTTL) |
| General | |
| Power Consumption | ≤50W |
Specifications are subject to change without notice. Contact our technical team for full conditions, interface definitions, and ordering information.
SYSTEM ARCHITECTURE
Product block diagrams
Handling notes
- Take anti-static precautions and ensure device ports are clean before use.
- Use a torque wrench to tighten coupling nuts where applicable.
- Check connector pin depth before calibration to avoid damage to calibration devices.
EXPLORE MORE
Related products
High-Speed Acquisition & Processing Boards
SYHS-8R8T-2GWideband RF Transceiver Board
The SYHS-8R8T-2G is a wideband RF transceiver board based on the ZU47DR RFSoC, with 8 RX and 8 TX…
View product
High-Speed Acquisition & Processing Boards
SYHS-DRFMHigh-Speed Acquisition & Generation Board
The SYHS-DRFM is a general-purpose high-speed acquisition and generation platform integrating one dual-channel high-speed DAC, one dual-channel low- speed…
View product
High-Speed Acquisition & Processing Boards
SYHS-16CH-S16-Channel Synchronous Acquisition Card
The SYHS-16CH-S is a 16-channel synchronous IF acquisition card supporting DDC, digital filtering, and optical fiber data transmission.
View productLET’S CONNECT
Find the right product for your next breakthrough.
Talk to our team about your measurement, signal processing, and system integration requirements.