HPORTEK / Vector Network Analyzers

SYVNA-2P-T67GDual-Port Vector Network Analyzer

The SYVNA-2P-T67G is a low-cost, high-performance, compact bench-top dual-port VNA covering 100 MHz to 67 GHz, with open interfaces for secondary development.

HPORTEK / Signal Generators

SYVSG-B500K40GPortable Vector Signal Generator

The SYVSG-B500K40G is a portable vector signal generator covering 500 kHz to 40 GHz for field test. It supports FM, AM, CW, FMCW, QPSK, BPSK, 8PSK, QAM, as well as spot jamming, wideband noise, linear chirp, chirp noise, and comb spectrum. It supports external and battery power, with over 2 hours of battery operation.

HPORTEK / EMC Power Amplifiers

SYPA-500W1000MCW Solid-State Power Amplifier

The SYPA-500W1000M is a solid-state, air-cooled wideband power amplifier for applications requiring wide instantaneous bandwidth, high gain, and linearity. It can be rack-mounted in a 19-inch standard cabinet or used as a bench-top instrument. It delivers at least 500W1000M of RF output power. The operator can adjust gain via the front panel. When RF input exceeds 0 dBm, the LNA power is shut off for protection. Over-temperature conditions trigger power-down to protect the amplifier. It features a color LCD touchscreen and physical buttons, displaying operational and fault status. Local and remote control are available via GPIB, USB, and Ethernet.

HPORTEK / Microwave Modules

KA-FREQ-SYNTH-CARDKa-Band Frequency Synthesizer Card

This product synthesizes widely hopping and finely adjustable RF frequencies to provide LO signals for up/down converters, while simultaneously outputting clock signals. It consists of a synchronous crystal oscillator module, a frequency multiplier and filter module, a transceiver frequency source module, and a digital board. With a miniaturized design, it is integrated and packaged as a 3U VPX board.

HPORTEK / High-Speed Acquisition & Processing Boards

SYHS-8R8T-2GWideband RF Transceiver Board

The SYHS-8R8T-2G is a wideband RF transceiver board based on the ZU47DR RFSoC, with 8 RX and 8 TX channels and up to 2 GHz instantaneous bandwidth per channel. It integrates high-speed RF-ADC/RF-DAC, UltraScale+ FPGA logic, and ARM processing for wideband acquisition, real-time arbitrary waveform generation, and on-chip DSP. The board uses optical interfaces for high-speed, low-latency bidirectional data transfer, supporting external reference clock and trigger synchronization with multi-board cascade capability.